43
LEVEL,
PHASE,
R-G,
R-B,
G-R,
G-B,
B-R,
B-G
• DETAIL
LEVEL,
MODE
Settings can be adjusted individually after
recalling a Picture Profile.
To save settings, save to a preset.
• The settings for a Picture Profile cannot be changed.
• To load specific settings at startup, save the settings in
preset position 1.
PTZ TRACE Menu
PTZ TRACE is a function used to record pan/tilt/zoom
operations, controlled by the remote commander or a
remote controller, and then to play back the operations
as required. Up to 16 pan/tilt/zoom positions can be
recorded for up to 180 seconds.
• If pan and tilt limits are configured in the PAN TILT/
ZOOM menu after recording operations, the pan and
tilt limits are not applied upon playback.
• To use the PTZ TRACE function and pan/tilt limit
function together, first configure the PAN and TILT
settings in the PAN TILT/ZOOM menu and then use
the PTZ TRACE function.
• Recorded operations will be erased if the IMG FLIP
setting or camera operating frequency setting is
changed.
• When P/T SPEED TYPE is set to Extd. STEP, the
recorded trace may not be reproducible upon
playback.
• Playback operations will restore CLEAR IMAGE
ZOOM, RAMP CURVE, P/T SPEED TYPE, P/T
SLOW MODE, and ZOOM SPEED TYPE to their
states held during recording.
TRACE NO:
Select the TRACE number to record, play
back, or delete.
RECORD:
Record operations.
PLAY:
Play back the recorded operations.
DELETE:
Delete the recorded operations.
RECORDED TRACE NO:
Displays the recorded
TRACE numbers.
ELAPSED TIME (SEC):
Displays the elapsed time
during recording or playback in seconds.
The HOME button (equivalent to ENTER) on the
supplied remote commander corresponds to the joystick
button on an optional remote controller.
Notes
Notes
Summary of Contents for BRC-H800
Page 65: ...Sony Corporation ...
