3-6
BVP-500
BVP-500P
Page
Ver.
Item
Settings
Contents
CAMERA ID
No.
1 to 96 (
[X]
)
Sets a camera number in the range of 1 to 96.
(When no camera number is set, “- -” is displayed.)
ID:
[]
[]
[]
[]
[]
[]
[]
Sets a camera ID of up to ten alphanumerics, symbols, and spaces.
1.10
No. / ID ON
CAM No., CAM ID,
Selects whether the camera number or ID is mixed with a camera output
BARS
[OFF]
signal only in the color-bar mode, or not.
(This setting is valid only when the DISPLAY switch is set to on or off.)
LENS FILE
1.10
CENTER H POS –20 to 20 (
[XX]
)
Shifts horizontally the location of the center marker on the screen.
20 (right)
↔
–20 (left)
1.10
CENTER V POS –20 to 20 (
[XX]
)
Shifts vertically the location of the center marker on the screen.
20 (up)
↔
–20 (down)
1.10
CENTER POS
Throw MENU SELECT
Stores the location of the center marker at present in the selected lens
STORE
switch to ENTER
file number.
to execute
1.10
No.
[0]
to 15
Shows a lens file number. (A lens file appropriate for the mounted lens
is automatically selected.)
d)
(Example)
No. : 1
←
Lens file number (0 to15)
Lens:27:A14x8BERM
←
Lens name
EX: 1.0
←
Lens extender value
d)
Fifty kinds of lenses are registered at the factory in the ROM IC36/AT-95 board. Up to 16 of these lenses can be stored as the lens
file in the RAM IC26/AT-95 board. An additional data such as a center marker is also stored in the selected lens file.
3-1. Setup Menu
3-1-1. Operation Menu
Summary of Contents for BVP-500
Page 14: ...1 6 BVP 500 BVP 500P 1 3 Outside Dimentions 1 3 Outside Dimentions Unit mm ...
Page 22: ...1 14 BVP 500 BVP 500P ...
Page 120: ......
