Sony BVW-55 Maintenance Manual Download

Page: 219 / 942

3-7

BVW-55 P2

3-1-5. Tightening Torque and Washer

1. Tightening torque and screwdriver

This model uses many M1.4 and M2 screws.

Be sure to use the specified tool when loosening or tightening these screws.

Use a torque screwdriver and tighten the screws with the specified tightening torque.

Torque screwdriver bit (for M1.4):

J-6325-110-A

Torque screwdriver bit (for M2):

J-6325-380-A

Hexagon bit (Across flat has 1.5 mm): J-6326-120-A
Torque screwdriver (for 3 kg):

J-6325-400-A

Tightening torque

For M1.4 screw:

m (0.9 kgf

cm)

For M2 screw:

m (2.0 kgf

cm)

Reference

This model uses small-sized screws. Be careful not to drop these screws in the unit during removal and

reinstallation. We recommend to magnetize the screwdriver bit to prevent that the screws drop.

2. Stop washer and E ring

Do not re-use the stop washer and E ring after removing them. Be sure to use a new stop washer and E

ring when installing parts.

Stop washer: 3-559-408-11

E ring(2.3):

7-624-105-04

Removing the stop washer and E ring

Remove the stop washer and E ring using small pliers or tweezers.

m
.

Be careful not to drop the stop washer and E ring in the unit.

Take care that the tool does not touch other parts, especially, the drum.

Installing the stop washer

It is recommended to use the tool below when installing the stop washer.

Stop washer fastening tool: J-6323-530-A

(1) Insert a stop washer into the thin tip of a stop

washer fastening tool.

(2) Put the thin tip of the tool on the top of the

shaft to be installed in a upright position.

(3) Push the tool downward and install the stop

washer to the shaft.

Stop washer fastening tool

Stop washer

3-1. General Information on Parts Replacement and Alignment

Summary of Contents for BVW-55















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for BVW-55

Reviews:

Related manuals for BVW-55

Brands by name

Popular brands

Sony BVW-55, Maintenance Manual

Search results

Summary of Contents for BVW-55

Reviews:

Related manuals for BVW-55

Brands by name

Popular brands