Sony BVW-55 Maintenance Manual Download

Page: 229 / 942

3-17

BVW-55 P2

6. Upper drum assembly installation

(1) Align the positioning hole of the upper drum

assembly shown in the figure with the

positioning pin of the lower drum, and put the

upper drum assembly on the lower drum. At

that time, confirm that the positioning pin
protrudes from the upper surface of the upper

drum.

Hold the upper drum assembly in the portion

where the video heads does not exist. Take

care that the video heads does not contact

with the brush post and its peripheral parts
when the upper drum assembly is installed.

Put the upper drum assembly on the lower

drum, and never push the outer circumferen-

tial part of the drum by hands.

(2) Push the center part of the upper drum with

fingers just downward and bring the upper

drum in contact with the flange of the lower

drum.

(3) In the state in step (2), fix the four screws

tentatively in the order shown in the figure at

the torque below.

[Tightening torque: 10

{1.0 kgf

cm}]

(4) Tighten the four screws at the torque below.

[Tightening torque: 25

{2.5 kgf

cm}]

3-2. Upper Drum Assembly Replacement

Upper drum assembly

Brush post

Positioning hole

Positioning pin

Upper drum fixing screws

Upper drum assembly

Summary of Contents for BVW-55















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for BVW-55

Reviews:

Related manuals for BVW-55

Brands by name

Popular brands

Sony BVW-55, Maintenance Manual

Search results

Summary of Contents for BVW-55

Reviews:

Related manuals for BVW-55

Brands by name

Popular brands