Sony BVW-55 Maintenance Manual Download

Page: 256 / 942

3-44

BVW-55 P2

(2) Remove the timing belt at the back of the

mechanical deck from the pulley.

Installation

2. Timing belt installation

(1) Clean the pulleys of the swing gear and

capstan motor with cleaning cloth moistened

with cleaning fluid.

(2) Loop a new timing belt over the pulley of the

swing gear.

(3) Loop the other end of the timing belt over the

pulley of the capstan motor.

3-11. Timing Belt Replacement

(4) Push the arm of the gear assembly in the

direction indicated by the arrow with fingers

and release it gently. The arm of the gear

assembly slightly returns in the clockwise

direction by spring force.

(5) Tighten the two screws loosened in step (1) of

procedure 1. At that time, do not hold the arm

of the gear assembly with fingers.

[Tightening torque: 9

{0.9 kgf

cm}]

Reference

The tension of the timing belt is adjusted by

performing steps (4) and (5).

(6) Apply locking fluid to the screws after

tightened in step (5). When applying, avoid

the slot of the screw.

Adjustment after replacement

3. Tape running adjustment

(Refer to Section 5-4.)

Pulley of swing gear

Timing belt

Pulley of capstan motor

Screw

(Tighten after

is done.)

Arm

(Push it in the arrow direction,
and then release gently.)

Summary of Contents for BVW-55















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for BVW-55

Reviews:

Related manuals for BVW-55

Brands by name

Popular brands

Sony BVW-55, Maintenance Manual

Search results

Summary of Contents for BVW-55

Reviews:

Related manuals for BVW-55

Brands by name

Popular brands