Sony BVW-55 Maintenance Manual Download

Page: 280 / 942

4-8

BVW-55 P2

GB(3) gear
assembly

Gear box housing

Bearing

Pulley

Timing belt

Post

GB(1) gear assembly

GB(3) gear assembly

Bearing

7. GB(3) gear assembly replacement

(1) Remove the bearings in the shafts on both

ends of the GB(3) gear assembly.

(2) Clean the shafts from both ends of a new

GB(3) gear assembly with dry cloth.

(3) Install bearings in the shafts on both ends of

the GB(3) gear assembly.

8. Gear box housing installation

(1) Insert the bearing of the GB(3) gear assembly

into the hole shown in the figure and put up

the gear assembly.

Be careful not to lose the bearing during

installation.

(2) Put the gear box housing among the three

posts on the mechanical deck as shown in the

figure, and push it to the position where the

pulley at the tip of the GB(1) gear assembly

touches the timing belt.

(3) Put the timing belt on the pulley using

tweezers and insert the bearing at the tip of

the GB(1) gear assembly firmly into the hole

of the mechanical deck.

(4) Push the gear box housing toward the

mechanical deck as far as it will go.

Be careful not to interpose the timing belt

between the gear box housing and mechani-

cal deck at that time.

4-2. Gear in Gear Box Replacement

Summary of Contents for BVW-55















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for BVW-55

Reviews:

Related manuals for BVW-55

Brands by name

Popular brands

Sony BVW-55, Maintenance Manual

Search results

Summary of Contents for BVW-55

Reviews:

Related manuals for BVW-55

Brands by name

Popular brands