Sony BVW-55 Maintenance Manual Download

Page: 281 / 942

4-9

BVW-55 P2

PWH1.4

3.5

PWH1.4

3.5

PWH1.4

3.5

ME gear

Install the ME gear with the
chamfered side up.

Notch

Plate (2)

Stop washer

ME gear

Bearing of GB(3)
gear assembly

9. Plate(2) installation

(1) Install the plate(2) into the gear box housing,

and confirm that the bearing at the tip of the

GB(3) gear assembly is firmly put into the

hole of plate(2).

(2) While moving the plate(2) in the direction of

the arrow A, fasten the plate(2) with the three

screws.

10. ME gear installation

Install the ME gear with a new stop washer.

Align the notch at the tip of the shaft with the
hole of the ME gear when the ME gear is in-

stalled.

4-2. Gear in Gear Box Replacement

11. Timing belt installation check

Check that the timing belt is put on the pulley of

the threading motor. If the timing belt is not put,

remove the threading motor assembly from the

mechanical deck once, then put the timing belt on

the pulley.

12. AT head assembly installation

Install the AT head assembly.

(Refer to Section 3-15.)

13. VH cleaner assembly installation

Install the VH cleaner assembly.

(Refer to Section 3-6.)

Adjustment after replacement

14. AT head position adjustment

(Refer to Section 5-8).

Summary of Contents for BVW-55















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for BVW-55

Reviews:

Related manuals for BVW-55

Brands by name

Popular brands

Sony BVW-55, Maintenance Manual

Search results

Summary of Contents for BVW-55

Reviews:

Related manuals for BVW-55

Brands by name

Popular brands