Sony BVW-55 Maintenance Manual Download

Page: 354 / 942

5-12

BVW-55 P2

5-3-2. REV Back Tension Check and Adjustment

Be sure to perform this check and adjustment when replacing the T reel table,

tension regulator band and T tension regulator arm.

Tool

Torque cassette (FWD back ten.) (MW-389): J-6323-890-A

Adjustment driver

Preparations

Check that the unit is in the unthreading end state.

Turn off the power.

Remove the upper frame without disconnecting the harness connectors.

(Refer to the maintenance manual Part 1, step (1) to (4) in Section 1-6-2.)

Remove the cassette compartment. (Refer to the maintenance manual Part 1,

Section 1-7.)

Set the switches S100-1 and S100-2 on the SV-206 board to ON.

5-3-2. REV Back Tension Check and Adjustment

Check procedure

1. T tension regulator arm operating

position check

For your reference

Adjust the T tension regulator arm operating

position by changing the tension regulator band in

length.

(1) Power on the unit and put the unit into the

threading end state.

(Refer to the step 1 in Section 4-2.)

(2) Check the positional relationship between the

connection line which connect the center-to-

center of T tension regulator arm (T6) guide

and T7 guide, and the side edge of the

mechanical deck is parallel.

(3) If not, adjust the eccentric pin (white) on the

tension regulator band using a flatbladed

screwdriver so that the positional relationship

meets.

T7 guide

Parallel

T tension regulator (T6) guide

Eccentric pin
(white)

Tension regulator
band

Summary of Contents for BVW-55















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for BVW-55

Reviews:

Related manuals for BVW-55

Brands by name

Popular brands

Sony BVW-55, Maintenance Manual

Search results

Summary of Contents for BVW-55

Reviews:

Related manuals for BVW-55

Brands by name

Popular brands