Sony BVW-55 Maintenance Manual Download

Page: 380 / 942

5-38

BVW-55 P2

Check procedure

5. Turn the power on

6. Play back the alignment tape

Play back the 10 kHz, -10 VU signal portion
(3:00 to 4:55) on the CR8-1A.

7. Check the AT head azimuth

(1) Adjust the horizontal and vertical amplitudes

of lissajous waveform to 6 cm each.

(2) Check that the lissajous waveform holds the

upper-right shape.

(3) Check that the vertical amplitude at the center

point in the horizontal direction satisfies the

specification.

(4) Repeat changing the mode STOP to PLAY

three times, check that the waveform satisfies

the specification on every PLAY mode.

(5) Repeat changing the mode REW to PLAY

three times, check that the waveform satisfies

the specification on every PLAY mode.

(6) Repeat changing the mode EJECT to PLAY

three times, check that the waveform satisfies

the specification on every PLAY mode.

If the specification is not satisfied in any

steps (3), (4), (5) or (6), perform steps 8 and

later.

5-10. AT Head Azimuth Check and Adjustment

Alignment tape : CR8-1A (3:00 to 4:55)

6 cm

Phase difference 0

Spec. : A

0.52 cm

Upper-right(OK)

Upper-left(NG)

Summary of Contents for BVW-55















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for BVW-55

Reviews:

Related manuals for BVW-55

Brands by name

Popular brands

Sony BVW-55, Maintenance Manual

Search results

Summary of Contents for BVW-55

Reviews:

Related manuals for BVW-55

Brands by name

Popular brands