E:\JOB\3857686011CBKNC01SYE\02GB09C01-SY.fm
masterpage:Left
CBK-NC01
3-857-686-01 (1)
24
Using PDZ-1 Proxy
Browsing Software
When a computer with the PDZ-1
Proxy Browsing Software installed is
connected to the camcorder, you can
transfer the proxy AV data and
metadata files recorded on a disc to the
computer. On the computer side, PDZ-
1 enables you to browse the proxy AV
data, add or modify metadata (titles,
comments, essence marks, etc.), or
create a clip list.
The modified metadata and the created
clip list can then be written back to the
disc loaded in the camcorder.
System requirements
The following are required to use PDZ-
1.
• Computer: PC with Intel Pentium III
CPU, at least 1 GHz
• Installed memory: at least 512 MB
• Operating system: Microsoft
Windows 2000 Service Pack 4 or
higher, or Microsoft Windows XP
Professional Service Pack 1 or higher
• Web browser: Internet Explorer 6.0
Service Pack 1 or higher
• DirectX: DirectX 8.1b or higher
To install PDZ-1
Insert the supplied CD-ROM in the
CD-ROM drive of the computer and
execute the Setup.exe file, then follow
the installation instructions.
• Make sure that the hard disk drive on
which the work folder to store the
material transferred from the
camcorder has adequate free space.
The amount of proxy AV data to be
transferred is approximately 1.4GB
per disc (for the DVCAM
camcorder).
• To transfer files between the
computer and the camcorder requires
the camcorder’s IP address and other
network-related settings to be made.
For details of the network-related
settings, see “Settings” (page 21).
Notes
