1-1 (E)
CBK-SD01
1-1. CBK-SD01 Configuration
The CBK-SD01 consists of the following:
.
DIF-147 board
(1)
.
B2
x
4
(2)
.
Precision screw P1.4
x
3.5
(2)
.
Installation Guide
(1)
.
Installation Manual
(1)
In addition to the Installation Manual, the following manuals are available.
.
PDW-510/510P/530/530P Operation Manual (Supplied with PDW-510/510P/530/530P)
This manual is necessary for application and operaion of PDW-510/510P/530/530P.
Part number: 3-205-742-0X
.
MSW-900/900P Operation Manual (Supplied with MSW-900/900P)
This manual is necessary for application and operaion of MSW-900/900P .
Part number: 3-206-082-0X
.
PDW-510/510P/530/530P, CBK-SD01 Maintenance Manual (Available upon request)
This manual intended for use by trained system and service engineers describes (the circuit overview,
character display functions, the main part replacements, electrical alignment, parts list, semiconductor
pin assignments, block diagrams, schematic diagrams, board layouts, etc.) required for parts-level
service.
For obtaining, contact your local Sony Sales Office/Service Center.
Part number : 9-968-032-71
1-2. Applicable Models for Installation
.
PDW-510/510P/530/530P
.
MSW-900/900P
1-3. Installation Procedure
Outline of the installing the CBK-SD01 to the PDW-510/510P/530/530P, MSW-900/900P is listed as
follows. For the details of the installation work, refer to the respective sections.
Installation procedure
Sections describing the detailed procedure
1. Opening the Inside Panel
1-4. Opening and Closing the Inside Panel
2. Installing the CBK-SD01 (DIF-147 Board)
1-5. Installing the CBK-SD01 (DIF-147 Board)
3. Closing the Inside Panel
1-4. Opening and Closing the Inside Panel
4. Operation Check
1-6. Select Output Signal
Select the output signal with the use of menu.
Confirm that the SDI singal is output from the
VIDEO OUT terminal.
Section 1
Installation
