1-3 (E)
CBK-SD01
Closing the Inside Panel
1.
Confirm that both of the right and left hinges are
engaged with the hooks of the chassis correctly.
2.
Attach the inside panel and fix it with the four screws
(with drop-safe).
n
Standard tightening torque value :
Screw (with drop-safe, B3
x
12)
0.8 N
.
m (8.0 kgf
.
cm)
n
Be careful not to pinch the harness between the inside
panel and chassis.
1-5. Installing the CBK-SD01 (DIF-147
Board)
1.
Disconnect the coaxial cable form the connector
(CN10) on the DCP-36 board (the DCP-32 board for
MSW-900/900P).
n
To disconnect the coaxial cable, do not attempt to
disconnect it by pulling the cable with force. Be sure
to hold the plug and disconnect the cable.
CN10
Coaxial cable
DCP-36 board
Hold the plug to
remove.
OK
Do not atempt to
remove by pulling
the cable.
NG
The illustration shows the PDW-510/510P/530/530P.