background image

Play

Compact Disc
Compact Player

Playing a CD right
away!

If you want to play a CD right now, choose to use your player on house
current.  Other choices are the following three:  rechargeable battery, dry
batteries (see “Power Sources” on the reverse side) and car battery.

Connect

Sony Corporation  ©1999  Printed in Malaysia

3

1

For the customers in the USA

This equipment has been tested and found to
comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference in a
residential installation.  This equipment
generates, uses, and can radiate radio frequency
energy and, if not installed and used in
accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference
will not occur in a particular installation.  If this
equipment does cause harmful interference to
radio or television reception, which can be
determined by turning the equipment off and on,
the user is encouraged to try to correct the
interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment

and receiver.

- Connect the equipment into an outlet on a

circuit different from that to which the receiver
is connected.

- Consult the dealer or an experienced radio/TV

technician for help.

You are cautioned that any changes or
modifications not expressly approved in this
manual could void your authority to operate this
equipment.

For the customers in Australia

The supply cord of the AC power adaptor cannot
be replaced; if the cord is damaged, the AC
power adaptor should be discarded.

For the customers not in Poland

The 

 mark on the unit is valid only for

products marketed in Poland.

For the customers not in Europe

The CE mark on the unit is valid
only for products marketed in the
European Union.

For the customers not in Russia

The mark on the unit and package is
valid only for products marketed in
Russia.

to a wall
outlet

AC power adaptor

DC IN 4.5 V

1

Slide OPEN to open the lid.

OPEN

Welcome!

Thank you for purchasing the Sony
Compact Disc Compact Player.
Before operating your player, please
read this manual and retain it for
future reference.

About this manual

The instructions in this manual are for the
D-E551, D-E555, D-E556CK and D-E559CK.
Before you start reading, check your model
number.

Owner’s Record

The model and the serial numbers are located at
the bottom.  Record these numbers in the spaces
provided below.  Refer to them whenever you
call upon your Sony dealer regarding this
product.

Model No. __________    Serial No.__________

WARNING

To prevent fire or shock
hazard, do not expose
the unit to rain or
moisture.

To avoid electrical
shock, do not open the
cabinet.  Refer servicing
to qualified personnel
only.

CAUTION

The use of optical instruments with this product
will increase eye hazard.

2

/REMOTE

For models supplied with the AC plug adaptor

If the AC power adaptor does not fit the wall outlet, use the AC plug adaptor.

For models supplied with the remote control

• Connect the plug of the earphones/headphones to the remote control.
• Connect the earphones/headphones to the remote control firmly. A loose connection may

cause noise during playback.

Place a CD

2

2

 Adjust the volume.

1

 Press 

^

.

To stop play, press 

p

.

To use the remote control

1

 Press 

(

.

2

 Adjust the volume.

Operating Instructions

About area code

The area code of the player you purchased is shown on upper left of the bar
code label on the package.
For accessories supplied with your player, check the area code of your model
and refer to “Supplied accessories” toward the end of this manual.

3-865-446-23 (1)

D-E551
D-E555
D-E556CK
D-E559CK

z

Other Operations

Playing tracks repeatedly

(Repeat Play)

You can play tracks repeatedly in normal,
INTRO PGM, shuffle or RMS (Random Music
Sensor) play modes. Repeat all the tracks or
only one track.

To repeat all the tracks

Press REPEAT/ENTER during play.
The “

” indication appears.

To cancel repeat play, press REPEAT/ENTER
again.

To repeat a single track

1

Press REPEAT/ENTER while the track you
want to repeat is playing.
The “

” indication appears.

2

Press PLAY MODE repeatedly until “1”
appears.

To repeat another track, press 

=

 or 

+

 .

To cancel repeat play, press REPEAT/ENTER
again.

Playing only the tracks
you want 

(INTRO PGM Play)

You can choose and play your favorite tracks
by scanning through the beginning of each
track in a CD.

1

During play, press PLAY MODE
repeatedly until “INTRO PGM” flashes.

2

Press 

^

 to start scanning.

The player plays about the first 15
seconds of each track and “INTRO PGM”
flashes faster.

3

Press REPEAT/ENTER while the track
you want is playing. To skip the track,
press 

+

 or just wait for the next track.

After you have gone through the CD,
“INTRO PGM” stops flashing and the tracks
you have chosen play automatically.

To finish programing before going through
the whole CD, press 

^

. The selected tracks

will be played.

If you press 

p

, the program will be  erased.

To prevent accidental erasure, set the
RESUME switch at the rear of the player to
ON.

To cancel INTRO PGM play, press PLAY
MODE repeatedly until the play mode
indication disappears from the display.

Using other functions

To minimize skipping (ESP

2

)

The ESP (Electronic Shock Protection)
function minimize skipping by using a buffer
memory that stores music data and plays it
back in the event of a shock.
The new ESP

2

 (ESP Squared) system uses a

new DSP (Digital Signal Processor) which can
read and store music data more efficiently,
providing a level of continuous skip
protection not found in traditional buffer
memory units. This decreases the frequency
of sound skipping and the need to utilize the
buffer memory. Use this function when
listening in a car or while walking.*

* Although ESP

2

 provides excellent protection

against skipping, it will not prevent skipping
while jogging or running.

Press ESP.
The ESP indication appears.

To release the ESP function, press ESP again.

Notes

• Playing may stop when the player gets a strong

shock even with the ESP function on.

• You may hear a noise or sound skip when:

— listening to a dirty or scratched CD,
— listening to an audio test CD or,
— the player receives continuous shock.

• Sound may drop for a while if  you press ESP

during play.

• When you use an optical digital connecting

cord, the ESP function will be disabled.

To enjoy more powerful bass sound
(Sound function)

You can enjoy a powerful bass-boosted sound.

Press SOUND to select “MB (Mega Bass)” or
“GRV (Groove).” “GRV” is more effective.

Note

• If the sound is distorted when emphasizing

bass, turn down the volume.

To lock the buttons

You can lock your player against any
accidental operations.
You can still operate the player with the
remote control.

Slide HOLD in the direction of the arrow.
When you press any button, “

Hold

” appears in

the display and you cannot operate the player.

To unlock, slide HOLD back.

Playing tracks in random
order 

(Shuffle Play)

You can play the tracks in a CD in random
order.

During play, press PLAY MODE repeatedly
until “SHUF” appears.
The tracks play in random order.

To cancel shuffle play, press PLAY MODE
repeatedly until the play mode indication
disappears from the display.

Note

• During shuffle play, you cannot return to

previous tracks by pressing 

=

 .

Playing tracks in the order
you want 

(RMS play)

You can program up to 22 tracks to play in
any order you choose.

1

During play, press PLAY MODE
repeatedly until “RMS*” flashes.

*RMS = Random Music Sensor

2

Press 

=

 or 

+

  to choose a track.

The track number and the playing order
appear.

3

Press REPEAT/ENTER to program the
track.

4

Repeat steps 2 and 3 to program the
remaining tracks.

5

Press 

^

 .

“RMS” stops flashing and the tracks you
have chosen play in the order you
specified.

If you press 

p

, the program will be erased. To

prevent accidental erasure, set the RESUME
switch at the rear of the player to ON.

To cancel RMS play, press PLAY MODE until
“RMS” disappears from the display.

To check the program

During programming:

Press REPEAT/ENTER before step 5.

During RMS play:

Press PLAY MODE repeatedly until “RMS”
flashes, then press REPEAT/ENTER.

Each time you press REPEAT/ENTER, the
track number and the playing order appear in
the order you specified.

Note

• If you program another track after the 22nd

track, the first track programed is cleared and
the new track is programed instead.

Flashing

Flashing

Playing order

Track number Flashing

Not these ways

Press

^

^

=

 once**

=

 repeatedly**

+

 once**

+

 repeatedly**

Hold down

 

+

**

Hold down

 

=

.**

*AMS = Automatic Music Sensor
**These operations are possible during both
play and pause.

If you press REPEAT/ENTER on the player to
display “

”, you can locate the tracks

continuously in the following order:
• When using 

+

: next track 

n

 next track

...... last track 

n

 first track 

n

 second track

......

• When using 

=

: previous track 

n

previous track ...... first track 

n

 last track

......

To remove the CD

Remove the CD while pressing the pivot.

Notes on controlling the volume with
the remote control

Set the VOL (volume) control on the remote
control to the maximum. Then adjust the
volume on the player to the level that you
want to be the maximum volume of the
remote control.

Notes on display

• When you press 

^

 or 

(

 (when RESUME

is set to OFF), the total number of tracks in
the CD and the total playing time appear for
about 2 seconds.

• During play, the track number and the

elapsed playing time of the current track
appear.

• During pause, the elapsed playing time

flashes in the display.

• Between tracks, the time to the beginning of

the next track will appear with the “–”
indication.

Notes on handling CDs

• To keep the CD clean, handle it by its edge.

Do not touch the surface.

• Do not stick paper or tape onto the CD.
• Do not expose the CD to direct sunlight or

heat sources such as hot air ducts.  Do not
leave the CD in a car parked under direct
sunlight.

To

Pause (main unit
only)

Resume play after
pause (main unit
only)

Find the beginning
of the current track
(AMS*)

Find the beginning
of previous tracks
(AMS)

Find the beginning
of the next track
(AMS)

Find the beginning
of succeeding
tracks (AMS)

Go forward
quickly

Go backwards
quickly

Continue to the reverse side 

m

Earphones
or
Headphones*

When using
earphones

PLAY MODE

=

/

+

REPEAT/
ENTER

PLAY MODE

+

REPEAT/
ENTER

^

PLAY MODE

^

=

/

+

ESP

* U2 model

supplied with
headphones

Label side up

2

Fit the CD to the pivot.

3

Close the lid.

SOUND

PLAY MODE

REPEAT/
ENTER

Reviews: