Playing CDs
Getting Started
Playing CDs
15
EN
Locating a Specific Track or a
Point in a Track
You can quickly locate any track while playing a disc
using the
≠/±
(AMS: Automatic Music Sensor)
buttons or number buttons on the remote. You can also
locate a specific point in a track while playing a disc.
≠/±
Number
buttons
=/+
0/)
To locate
the next or
succeeding tracks
the current or
preceding tracks
a specific track
directly
Z
a point in a track
while monitoring the
sound
Z
a point in a track
quickly by observing
the display
Z
Press
±
repeatedly until you find the
track
≠
repeatedly until you find the
track
The number button of the track on the
remote
0
(backward)/
)
(forward) on the
remote and hold down until you find
the point
0
(backward)/
)
(forward) on the
remote and hold down until you find
the point during pause. You will not
hear the sound during the operation.
Specifying the Next Disc to
Play
You can specify the next disc to play while playing a
disc in Continuous or 1 DISC Shuffle Play mode.
While playing a disc, turn the JOG dial. “NEXT DISC”
appears in the display and the disc number or Disc
Memo (see page 23) changes as you turn the JOG dial.
When the disc number or Disc Memo you want
appears in the display, stop turning the JOG dial.
After the current disc is played, the next disc you have
specified starts playing.
If you want to skip to the next disc right away, push
the JOG dial while playing the current disc.
To cancel the disc you have specified
Press CONTINUE twice.
Next disc number or
the Disc Memo
>10
When you directly locate a track numbered over 10
Z
Press >10 first, then the corresponding number buttons
on the remote.
Note
If “– OVER –” appears in the display, the disc has reached the
end while you were pressing
)
on the remote. Press
≠
or
0
on the remote to go back.
ALL DISCS
NEXT
DISC
CD1
NEXT DISC
3 8
* D I S C - 3 8 *
