– 11 –
SECTION 4
TEST MODE
ADJ MODE
1. Press the
I
/
u
button to turn ON the power, and open the front
cover.
2. Place the CD on the slit, close the front cover, and chuck the
the CD.
3. Press the
I
/
u
button to turn OFF the power.
4
Disconnect the power supply from the outlet.
5. Short-circuit the test point (TP ADJ) and test point (TP GND)
of the MAIN board with a lead wire.
6. Insert the power plug into the outlet.
The CD is played back automatically and the ADJ mode is set.
• Prohibits high speed search during accessing
• Ignores even if GFS becomes L
ADJ Mode Special Function Table
(The buttons shown in the (
) function only when the remote
commander provided is used.)
Button
Function
(3)
(8)
CHECK
CLEAR
Tracking servo, sled servo OFF
Tracking servo, sled servo ON
Observation mode during S
Automatic eccentricity measurement (Not used for servicing)
Display of special functions in ADJ mode
• Observation mode during S
When this mode is set, the below will be displayed. *1
• Automatic eccentricity measurement (Not used for servicing)
When this mode is set, the below will be displayed.The
Sokuteichu count down display will be counted down from 4 to
to 1 *2.After counting down, the eccentricity value will be
displayed *3.
FLUORESCENT INDICATOR TUBE, LED ALL LIT,
AND KEY CHECK MODE
1. Short-circuit the test point (TP ADJ) and test point (TP AFADJ)
of the MAIN board with a lead wire.
2. Insert the power plug into the outlet. The whole fluorescent
indicator tube lights up.
When the SRAM is faulty, “SRAMNG” will be displayed.
3. Pressing the
I
/
u
button sets the key check mode.
All buttons have individual button numbers.
When a button is pressed, the button number is counted up
and displayed.
Buttons and Corresponding Button Numbers
CLEAR
CHECK
FADER
MEMO SEARCH
INPUT
TIME/TEXT
PUSH ENTER
±
≠
REPEAT
PLAY MODE
I
/
u
X-FADE
NO DELAY
GROUP 5
GROUP 4
GROUP 3
GROUP 2
GROUP 1
GROUP FILE
·
P
p
PLUS ONE
MEGA CONTROL
DISC/CHARACTER
Button
Button Number or Display
ALL DISCS
S - J I m o d e
*1
CD1
ALL DISCS
Sokuteichu count down display
TRACK
MIN
SEC
NEXT
DISC
DISC
CD1
Sokuteichu
-4
*2
ALL DISCS
CD1
H e n s hin 0 2 1
*3
Eccentricity value
1 DISCS
DISC
CD1
**
**
Count up display
Displays button number
0
1
2
3
4
5
6
8
9
14
15
16
17
18
24
25
26
27
28
29
All lit (LED lights up)
Partially lit 1 (LED lights up)
Partially lit 2
LED lights up
Partially lit 3 (LED lights up)
Partially lit 4
Each time JOG is rotated, GROUP FILE 1 2 3 4
5 is displayed on the fluorescent indicator tube,
and 1, 2, 3, 4, 5 light up one by one, and GROUP
LED 1, 2, 3, 4, 5 lights up one by one.
Clockwise : GROUP FILE 1
n
2
n
3
n
4
n
5
Counterclockwise : GROUP FILE
5
n
4
n
3
n
2
n
1
STANDBY LED OFF
PUSH OPEN
(DOOR SW ON)
STANDBY LED ON
PUSH OPEN
(DOOR SW OFF)
Summary of Contents for CDP-CX57 - 50 Disc Cd Changer
Page 34: ... 44 Page 31 Page 36 ...
