VARIOUS OPERATION
16
Timer playback
By connecting with the external timer, playback can be
started or stopped at the desired time. Refer also to the
operation manual of the timer.
1
Turn on the power of the timer.
2
Carry out steps
1
to
3
of Playback
in page 6.
3
Select PLAY of “Timer” in the
MENU Mode.
1 In stop mode, Press the MENU/EXIT button
to display “MENU Mode”.
2 Turn the AMS control to display “Timer”,
then press the AMS control.
3 Turn the AMS control to display “PLAY”,
then press the AMS control.
4 Press the MENU/EXIT button.
4
Set the external timer to your
preference.
After the timer playback
If “PLAY” of “Timer” is selected, play will start automatically
whenever the power is turned on. When the timer is not used,
select “OFF” of “Timer”.
Notes
•
In playing of the programmed play by the timer, the
program is played up to the 24th track after the power
is turned off once.
•
When Auto cue or Auto pause is set, play is paused at
the beginning of the 1st track. To play by timer, set
Auto cue or Auto pause to OFF.
Last mode memory
After turning off the power, this unit retains the last
setting contents. When the power is turned on, this
unit can be used in the same settings.
The setting contents this unit retains are as follows.
•
Playback mode (CONTINUE, PROGRAM
SHUFFLE)
•
Repeat play mode (ALL REPEAT, 1 track REPEAT,
OFF)
•
Auto cue/pause mode (AUTO CUE, AUTO PAUSE,
OFF)
•
Playback speed
•
VARI SPEED ON/OFF
•
Music scan time (6 seconds to 20 seconds)
•
Auto cue level (–72dB, –66dB, –60dB, –54dB,
–48dB)
•
Sound during search in pause mode ON/OFF
•
Timer play PLAY/OFF
•
Parallel setting (PRESET/USER)
•
User parallel I/O setting (PI 1 to 5, PO 1to 3)
•
Program (up to 24 tracks)
Summary of Contents for CDP-D11
Page 24: ...OTHERS 24 Printed in Japan ...
