Recording From CDs
16
GB
n
HALF
˜
C-46 23.00
˜
C-54 27.00
˜
C-60 30.00
N
n
- -. - -
˜
C-90 45.00
˜
C-74 37.00
N
Fading out at the specified time
(Time Fade) (CDP-XE520 only)
You can have the player fade out automatically by
specifying the playing time. Once you set the time fade,
it works twice, that is, the play fades out at the end of
both sides of a tape.
Changing the fading time (CDP-XE520 only)
You can change the fading time from 2 to 10 seconds
before fading in or out. If you don’t change it, fading
lasts for 5 seconds.
1
Before you start playing, press FADER.
2
Press the number buttons to specify the fading
time.
Notes
• The fading time is reset to 5 seconds when you turn off the
player.
• If you press FADER during Music Scan (page 10), fading
time changes to 2 seconds.
EDIT/TIME FADE
0
/
)
·
P
1
Press EDIT/TIME FADE repeatedly before you
start playing until “T.FADE” and “TAPE A”
appear in the display.
2
Press
0
or
)
to specify the playing time. Each
time you press these buttons, the display changes
as shown below with the tape length of one side.
When you select “HALF”
The player sets the playing time to a half of the total
playing time.
3
Press
·
to start playing.
At the specified time the play fades out and the
player pauses. “TAPE B” appears in the display.
4
To record on side B, reverse the tape and press
·
or
P
on the player to resume playing.
Again, the play fades out at the specified time.
To cancel Time Fade
Press EDIT/TIME FADE.
You can freely specify the playing time
See “You can specify the tape length freely” on page 15.
You can change discs during Time Fade
If the play ends before the specified fade-out time, (for
example, when you record CD-singles on a tape) you can
change the disc. The specified fade-out time is counted
only during playing.
You can fade in to resume playing in Step 4
After you reverse the tape, press FADER on the remote.
Notes
• Time Fade will be cancelled if you press
0
or
)
during
the operation.
• “HALF” does not appear when the disc has more than 24
tracks.
To
Start play fading in
End play fading out
Press FADER
During pause. For the CDP-XE520,
“FADE” flashes. For the CDP-XE320
and CDP-XE220,
FADE
lights up
and the
Q
indication flashes. Then
play fades in.
When you want to start fading out.
For the CDP-XE520, “FADE”
flashes. For the CDP-XE320 and
CDP-XE220,
FADE
lights up and the
q
indication flashes. Then play
fades out and the player pauses.
Fading time lasts for 5 seconds. If you press FADER
during Music Scan (page 10), fading time changes to 2
seconds (CDP-XE520 only).
