26
CDX-5V661/5V661A/5V661D/5V661S
MODE LED display
L1
L2
L3
L4
L5
L6
L7
L8
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
* The check results of each key cannot be confirmed with the MODE LED.
How to enter the Check mode
1. Rotating the rotary switch, adjust the display (7 Seg LED) to “2” (third place).
After 2 or 3 seconds, the display will change to the execution mode.
2. The display mode number can be changed by pressing the
1
and
2
keys.
(See “Example” in step 2 in the Normal mode on page 22 and 23)
3. Press
3
and
4
keys to check manually the elevator motor operation.
4. Press
7
and
8
keys to check manually the loading motor operation.
5. Press
qa
and
qs
keys to check manually the divider motor operation.
6. The linear position can be adjusted by pressing
qh
key.
For the adjusted values and adjustment results, see “Display List” (page 18 and 19).
3. Mechanism Check Mode
(See “Display List” on page 18 and 19)
This mode can adjust the linear position and check manually the operation of the elevator motor, loading motor, and divider motor.
Also, the disc can be ejected forcibly by moving each motor manually.
However, manual operation could destroy the mechanism depending on the mechanical position, thus requiring extreme care.
Push key (execution key) assignment
: Software version display
: DTMS display
Key
Description
1
DISP –
2
DISP +
3
ELEVATOR MOTOR -
4
ELEVATOR MOTOR +
5
6
7
LOADING MOTOR -
8
LOADING MOTOR +
Key
Description
9
0
qa
DIVIDER MOTOR –
qs
DIVIDER MOTOR +
qd
qf
qg
qh
LINEAR POSITION ADJUST
www. xiaoyu163. com
QQ 376315150
9
9
2
8
9
4
2
9
8
TEL 13942296513
9
9
2
8
9
4
2
9
8
0
5
1
5
1
3
6
7
3
Q
Q
TEL 13942296513 QQ 376315150 892498299
TEL 13942296513 QQ 376315150 892498299
