L
R
Connection Example
BUS
AUDIO IN
REMOTE IN
LINE OUT
FRONT/LINE
IN (EQ IN)
FRONT
Rotary commander (not supplied)
LINE OUT
REAR/LINE
IN (EQ IN)
REAR
When connecting digital
pre-amplifier
from car antenna
Rear speakers
Front speakers
BUS CONTROL IN
Fuse (15 A)
Blue/white striped
Max. supply current 0.3 A
Max. supply current 0.1 A
Yellow
Black
Green
Right
Left
Rear speakers
Right
Front speakers
Left
Notes on the control leads
•
The power antenna control lead (blue) su12 V DC when you turn on the tuner.
•
A power antenna without relay box cannot be used with this unit.
Memory hold connection
When the yellow power input lead is connected, power will always be supplied to the memory circuit even when the ignition key
is turned off.
Notes on speaker connection
•
Before connecting the speakers, turn the unit off.
•
Use speakers with an impedance of 4 to 8 ohms, and with adequate power handling capacities. Otherwise, the speakers may be
damaged.
•
Do not connect the terminals of the speaker system to the car chassis, and do not connect the terminals of the right speaker with
those of the left speaker.
•
Do not attempt to connect the speakers in parallel.
•
Do not connect any active speakers (with built-in amplifiers) to the speaker terminals of the unit. Doing so may damage the
active speakers. Therefore, be sure to connect passive speakers to these terminals.
LINE OUT
(EQ OUT)
RCA pin cord (RC-63 (1 m), RC-64 (2 m) or RC-65 (5 m)) (not supplied)
RCA pin cord (RC-63 (1 m), RC-64 (2 m) or
RC-65 (5 m)) (not supplied)
BUS cable (not supplied)
8
CD/MD changer
RCA pin cord (not supplied)
Digital pre-amplifier
XDP-U50D
Power amplifier
Power amplifier
White
Blue
Gray
Red
Purple
to a metal point of the car
First connect the black earth lead, then connect the yellow and red
power input leads.
to the +12 V power terminal which is energized at all times
Be sure to connect the black earth lead to it first.
to the +12 V power terminal which is energized in the accessory
position of the ignition key
Be sure to connect the black earth lead to it first
to a power antenna relay control box
ANT REM
AMP REM
