23
EN
Erasing tracks in a programme
1
Press
(SHIFT)
, then press
(4)
(PLAY
MODE) for two seconds.
“P 1” shows Programme 1 is selected.
If you have labelled the disc, the bank edit
mode appears. Press
(4)
(PLAY MODE) to
display “P 1” above.
To select Programme 2, press
(5)
(
n
)
repeatedly until “P 2” appears.
2
Press
(2)
(
N
) or
(5)
(
n
) to select the
track you want to erase.
The track currently registered in slot 6 of
Programme 1.
3
Press
(6)
(ENTER) for two seconds.
When you erase a track from a slot number,
the succeeding tracks shift up to fill the gap.
4
To continue erasing tracks, repeat steps
2 and 3.
5
When you finish erasing tracks, press
(4)
(PLAY MODE) for two seconds.
6
Press
(SHIFT)
.
Track slot number
µ
PLAY
DISC
TRACK
MODE
ENTER
PLAY
DISC
TRACK
MODE
ENTER
PLAY
DISC
TRACK
MODE
ENTER
PLAY
DISC
TRACK
MODE
ENTER
Labeling a CD
— Disc Memo (CD unit with the custom file
function)
You can label each disc with a personalized
name. You can enter up to eight characters for
a disc. If you label a CD, you can locate the
disc by name (page 25) and select the specific
tracks for playback (page 25).
1
Play the CD and press
(LIST)
for two
seconds.
2
Enter the characters.
1
Rotate the dial clockwise to select the
desired characters.
(A
n
B
n
C
n
··· Z
n
0
n
1
n
2
n
··· 9
n
+
n
–
n
*
n
/
n
\
n
>
n
<
n
.
n
_ )
If you rotate the dial counterclockwise,
the characters appear in the reverse
order.
If you want to put a blank space
between characters, select “_” (under-
bar).
2
Press
(5)
(
n
) after locating the
desired character.
The flashing cursor moves to the next
space.
If you press
(2)
(
N
), the flashing cursor
moves to the left.
3
Repeat steps
1
and
2
to enter the
entire name.
3
To return to normal CD playback mode,
press
(LIST)
for two seconds.
Tip
To erase/correct a name enter “_” (under-bar) for
each character.
DISC
DISC
DISC
CD/MD Unit
