13
N o t e s
• The unit does not store stations with weak
signals. If only a few stations are received, some
number buttons will retain their former setting.
• When a number is already indicated in the
display, the unit stores stations in order from the
one currently displayed.
Memorising only the
desired stations
You can preset up to 40 stations (10 each for
FM1, FM2, MW, and LW) in the order of your
choice.
1
Press
(SOURCE)
repeatedly to select the
tuner.
2
Press
(MODE)
repeatedly to select the
band.
3
Push the SEEK/AMS control up or down
to tune in the station that you want to
store on the number button.
4
Press and hold the desired number
button (
(1)
to
(10)
) until “MEM”
appears.
The number button indication appears in
the display.
N o t e
If you store a new station on a number button
which already has a station registered, the
previously stored station will be replaced by new
one.
Receiving the memorised
stations
1
Press
(SOURCE)
repeatedly to select the
tuner.
2
Press
(MODE)
repeatedly to select the
band.
3
Press the number button (
(1)
to
(10)
)
where the desired station is stored.
If you cannot tune in a preset
station
Push and release the SEEK/AMS control
up or down to search for the station
(automatic tuning).
Scanning stops when the unit receives a
station. Push the SEEK/AMS control up or
down repeatedly until the desired station is
received.
N o t e
If the automatic tuning stops too frequently, press
(SHIFT)
, then press
(4)
(PLAY MODE) repeatedly
until “Local” (local seek mode) is displayed. Then
press
(5)
(
n
) to select “Local on.” Press
(SHIFT)
.
Only the stations with relatively strong signals will
be tuned in.
T i p
If you know the frequency of the station you want
to listen to, push the SEEK/AMS control up or
down and hold until the desired frequency
appears (manual tuning).
