30
Erasing the disc memo
1
Press
(SOURCE)
repeatedly to select CD.
2
Press
(MODE)
repeatedly to select the CD
unit.
3
Press
(PTY/LIST)
for two seconds.
4
Press
(DSPL)
for two seconds.
5
Rotate the dial to select the name you
want to erase.
6
Press
(6)
(ENTER) for two seconds.
The name is erased.
Repeat steps 5 and 6 if you want to erase
other names.
7
Press
(PTY/LIST)
for two seconds.
The unit returns to normal CD playback
mode.
Note
When the personalised label is erased, the original
CD TEXT information will appear in the display.
Locating a disc by name
— List-up (For a CD unit with the custom
file function or MD unit)
You can use this function for discs that have
been assigned a custom name. For more
information on disc names, refer to “Labelling
a CD” (page 29).
1
During CD plyaback, press
(PTY/LIST)
.
The name assigned to the current disc
appears in the display.
When you assign a disc memo label to a
CD TEXT disc, it takes priority over the
original CD TEXT information.
2
Press
(PTY/LIST)
repeatedly until you
find the desired disc.
3
Press
(6)
(ENTER) to play back the disc.
Notes
• After a disc name has been displayed for five
seconds, the display returns to normal playback
mode. To turn off the display, press
(DSPL)
.
• The track names are not displayed during MD or
CD TEXT disc playback.
• If there are no discs in the magazine, “NO Disc”
appears in the display.
• If a disc has not been assigned a custom file,
“
********
” appears in the display.
• If the disc information has not been read by the
unit, “?” appears in the display. To load the disc,
first press the number button, then choose the
disc that has not been loaded.
• The information appears only in upper case.
There are also some letters which cannot be
displayed (during MD or CD TEXT disc playback).
ENTER
DISC
