15
Labelling a CD
—
Disc Memo
(For a CD unit with the custom file function)
You can label each disc with a personalised
name. You can enter up to eight characters for
a disc. If you label a CD, you can locate the
disc by name (page 16) and select the specific
tracks for playback (page 17).
1
Press
(MENU)
, then press either side of
(DISC/PRST)
repeatedly until ”Name
Edit” appears.
2
Press
(ENTER)
.
Name edit mode
3
Enter the characters.
1
Press (+) side of
(DISC/PRST)
repeatedly to select the desired
characters.
(A
t
B
t
C
t
··· Z
t
0
t
1
t
2
t
··· 9
t
+
t
–
t
*
t
/
t
\
t
>
t
<
t
.
t
)
If you press (–) side of
(DISC/PRST)
repeatedly, the characters will appear in
reverse order.
If you want to put a blank space
between characters, select “ ” (under-
bar).
2
Press (+) side of
(SEEK/AMS)
after
locating the desired character.
The next character flashes.
If you press (–) side of
(SEEK/AMS)
, the
previous character flashes.
3
Repeat steps
1
and
2
to enter the
entire name.
4
To return to normal CD playback mode,
press
(ENTER)
.
Tips
• To erase or correct a name, enter “
” (under-
bar) for each character.
• There is another way to start labelling a CD. Press
and hold
(LIST)
for two seconds instead of steps
1 and 2. You can also complete the operation by
pressing and holding
(LIST)
for two seconds
instead of step 4.
Displaying the disc memo
Press
(DSPL/PTY)
during CD or CD TEXT
disc playback.
Each time you press
(DSPL/PTY)
during CD
or CD TEXT disc playback, the item
changes as follows:
V
Disc number
*
1
/Track number/
Elapsed playback time
V
Disc memo name
V
Track name
*
2
V
FM1 frequency
*
3
*
1
While an optional CD unit is connected.
*
2
If you connect an optional CD unit with the
CD TEXT function, the CD TEXT information
will appear in the display when you play a
CD TEXT disc.
*
3
While the AF/TA function is activated.
