43
RDS
Problem
The SEEK starts after a few
seconds of listening.
No traffic announcements.
PTY displays “None.”
Cause/Solution
The station is non-TP or has weak signal.
t
Press
(AF)
or
(TA)
repeatedly until “AF off” or
“TA off” appears.
•Activate “TA.”
•The station does not broadcast any traffic announcements
despite being TP.
t
Tune to another station.
The station does not specify the programme type.
DSP
Problem
No sound, or sound is too low.
The volume level cannot be
increased.
Cause/Solution
The volume of the speakers may have been automatically
lowered in order to maximise the effect of the listening
position adjustment.
t
Press either side of
(SEEK/AMS)
to adjust the balance.
The speaker balance can be set separately for DSP on mode
and DSP off mode (page 32).
The DSO function is activated and all the filters for the volume
level are adjusted to +12 dB.
