22
2
1
3
Selecting the listening
position
You can set a delayed time for the sound to
reach the listeners from the speakers.
In this way, the unit can simulate a natural
sound field so that you feel as if you are in the
centre of the sound field no matter where you
sit in the car.
1
Press
(SOURCE)
to select a source (tuner,
CD, or MD).
2
Press
(SOUND)
repeatedly until “POS”
appears.
3
Press either side of
(SEEK/AMS)
to select
the desired listening position.
Each time you press
(SEEK/AMS)
, the item
changes as follows:
All
y
Front
y
Front-R
y
Front-L
y
Rear
y
off
y
All
To cancel the POS mode, select “off.”
After three seconds, the display returns to
the normal playback mode.
Adjusting the equalizer curve
1
Press
(MENU)
.
2
Press either side of
(DISC/PRST)
repeatedly until “EQ Tune” appears,
then press
(ENTER)
.
3
Press either side of
(SEEK/AMS)
to select
the desired equalizer curve, then press
(ENTER)
.
Each time you press
(SEEK/AMS)
, the item
changes as follows:
Rock
y
Vocal
y
Groove
y
Techno
y
Custom
y
off
y
Rock
4
Select the desired frequency and level.
1
Press either side of
(SEEK/AMS)
to
select the desired frequency.
Each time you press
(SEEK/AMS)
, the
frequency changes as follows:
62 Hz
y
157 Hz
y
396 Hz
y
1.0kHz
y
2.5kHz
y
6.3kHz
y
16.0kHz
2
Press either side of
(DISC/PRST)
to
adjust the desired volume level.
The volume is adjustable by 1 dB steps
from –12 dB to +12 dB.
To restore the factory-set equalizer curve,
press
(ENTER)
for two seconds.
5
Press
(MENU)
twice.
When the effect setting is complete, the
normal playback mode appears.
Display
window
POS
All
POS
Front
POS
Front-R
POS
Front-L
POS
Rear
POS
off
Centre of sound
field
Normal setting
(
1
+
2
+
3
)
Front part
(
1
+
2
)
Right front (
2
)
Left front (
1
)
Rear part (
3
)
Cancel
01US05RAD-U.p65
1/20/00, 10:13 PM
22
