11
Playing tracks repeatedly
— Repeat Play
The disc in the main unit will repeat a track, the
entire album, or the entire disc when it reaches
the end. For repeat play, you can select:
• REP-TRACK — to repeat a track.
• REP-ALBM*
1
— to repeat an album.
• REP-DISC*
2
— to repeat a disc.
*1
Available only when optional CD unit with the MP3
file control function is connected.
*2
Available only when one or more optional CD/MD
units are connected.
During playback, press
(1)
on the
card remote commander repeatedly
until the desired setting appears in the
display.
Repeat Play starts.
To return to normal play mode, select “REP-
OFF.”
Playing tracks in random
order
— Shuffle Play
You can select:
• SHUF-ALBM*
1
— to play the albums in the
current optional CD unit with the MP3 file
control function in random order.
• SHUF-DISC — to play the tracks on the
current disc in random order.
• SHUF-CHGR*
2
— to play the tracks in the
current optional CD (MD) unit in random
order.
• SHUF-ALL*
3
— to play all the tracks in all the
connected CD (MD) units (including this unit)
in random order.
*1
Available only when optional CD unit with the MP3
file control function is connected.
*2
Available only when one or more optional CD (MD)
units are connected.
*3
Available only when one or more optional CD units,
or two or more optional MD units are connected.
During playback, press
(2)
on the
card remote commander repeatedly
until the desired setting appears in the
display.
Shuffle Play starts.
To return to normal play mode, select “SHUF-
OFF.”
Note
“SHUF-ALL” will not shuffle tracks between CD units
and MD units.
Labelling a CD
— Disc Memo (For a CD unit with the
CUSTOM FILE function)
You can label each disc with a custom name
(Disc Memo). You can enter up to 8 characters
for a disc. If you label a CD, you can locate the
disc by name (page 12).
1
Start playing the disc you want to label
in a CD unit with the CUSTOM FILE
function.
2
Press
(MENU)
, then press
(DISC/PRESET)
(+) or
(DISC/PRESET)
(–)
repeatedly until “NAMEEDIT” appears.
3
Press
(ENTER)
.
The unit will repeat the disc during the
labelling procedure.
4
Enter the characters.
1
Press
(DISC/PRESET)
(+)
*
1
repeatedly to select the desired
character.
A
t
B
t
C
...
t
0
t
1
t
2
...
t
+
t
–
t
*
...
t
_
*
2
t
A
*1
For reverse order, press
(DISC/PRESET)
(–).
*2
(blank space)
2
Press
(SEEK)
(+) after locating the
desired character.
If you press
(SEEK)
(–), you can move
back to the left.
3
Repeat steps
1
and
2
to enter the
entire name.
5
To return to normal play mode, press
(ENTER)
.
continue to next page
t
