19
Setting the equalizer (EQ7)
You can select an equalizer curve for 7 music
types (XPLOD, VOCAL, CLUB, JAZZ, NEW
AGE, ROCK, CUSTOM, and OFF (equalizer
OFF)).
You can store a different equalizer setting for
each source.
Selecting the equalizer curve
1
Press
(SOURCE)
to select a source
(radio, CD, or MD).
2
Press
(EQ7)
repeatedly until the
desired equalizer curve.
Each time you press
(EQ7)
, the item
changes.
To cancel the equalizing effect, select “OFF.”
After 3 seconds, the display returns to normal
play mode.
Adjusting the equalizer curve
You can store and adjust the equalizer settings
for frequency and volume level.
1
Press
(MENU)
.
2
Press
(DISC/PRESET)
(+) or
(DISC/PRESET)
(–) repeatedly until
“EQ7 TUNE” appears, then press
(ENTER)
.
3
Press
(SEEK)
(+) or
(SEEK)
(–) to
select the desired equalizer curve,
then press
(ENTER)
.
Each time you press
(SEEK)
(+) or
(SEEK)
(–), the item changes.
4
Select the desired frequency and level.
1
Press
(SEEK)
(+) or
(SEEK)
(–) to
select the desired frequency.
Each time you press
(SEEK)
(+) or
(SEEK)
(–), the frequency changes.
62 Hz
y
157 Hz
y
396 Hz
y
1 kHz
y
2.5 kHz
y
6.3 kHz
y
16 kHz
2
Press
(DISC/PRESET)
(+) or
(DISC/PRESET)
(–) to adjust the
desired volume level.
The volume level is adjustable in 1 dB
steps from –10 dB to +10 dB.
To restore the factory-set equalizer curve,
press
(ENTER)
for 2 seconds.
5
Press
(MENU)
twice.
When the effect setting is complete, the
display returns to normal play mode.
