9
Other functions
Changing the sound
settings
Adjusting the sound characteristics
— BAL/FAD/SUB/AUX
You can adjust the balance, fader, and subwoofer
volume.
1
Press the select button repeatedly
until “BAL,” “FAD” or “SUB” appears.
The item changes as follows:
LOW
*
1
t
MID
*
1
t
HI
*
1
t
BAL
(left-right)
t
FAD
(front-rear)
t
SUB
(subwoofer volume)*
2
t
AUX
(AUX
volume)*
3
*1
When EQ3 is activated (page 9).
*2
When the audio output is set to “SUB”
(page 10).
“ATT” is displayed at the lowest setting, and can
be adjusted up to 20 steps.
*3
When “AUX” source is selected.
2
Rotate the volume control dial
repeatedly to adjust the selected item.
After 3 seconds, the setting is complete and
the display returns to normal play/reception
mode.
Note
Adjust within 3 seconds of selecting the item.
With the card remote commander
In step 2, to adjust the selected item, press VOL +
or –.
Adjusting the equalizer curve
— EQ3
You can adjust and store the equalizer settings
for different tone ranges.
1
Select a source, then press
(EQ3)
repeatedly to select the EQ3 type.
2
Press the select button repeatedly
until “LOW,” “MID” or “HI” appears.
3
Rotate the volume control dial
repeatedly to adjust the selected item.
The volume level is adjustable in 1 dB steps,
from –10 dB to +10 dB.
Repeat steps 2 and 3 to adjust the equalizer
curve.
To restore the factory-set equalizer curve,
press and hold the select button before the
setting is complete.
After 3 seconds, the setting is complete and
the display returns to normal play/reception
mode.
With the card remote commander
In step 3, to adjust the selected item, press VOL +
or –.
Labeling a station/disc
When you receive a station, or play a disc in a
CD changer with the CUSTOM FILE function,
you can label each station/disc with a custom
name up to 8 characters (Station Memo/Disc
Memo).
If you label a station/disc, the name appears on
the list (page 8 or 11).
1
While receiving a station or playing a
disc that you want to label, press and
hold
(LIST)
.
2
Rotate the volume control dial
repeatedly until the desired character
appears.
The character changes as follows:
A
y
B
y
C
...
y
0
y
1
y
2
...
y
+
y
–
y
...
y
(blank space)
y
A
To move the digital indication, press the
select button.
Repeat this operation until the entire name is
entered.
3
Press and hold
(LIST)
.
The labeling is complete and the display
returns to normal play/reception mode.
To display the name, press
(DSPL)
during
reception or playback.
Tips
•
To correct or erase a character, overwrite or enter
“
.”
•
The Disc Memo always takes priority over any
prerecorded title.
•
You can label a disc on the unit if a changer with the
CUSTOM FILE function is connected.
•
“REP-TRACK” and all shuffle play are suspended
until the labeling is complete.
With the card remote commander
In step 2, to select the character, press VOL + or –.
continue to next page
t
