10
Deleting the custom name
1
Select the radio, or the unit that has stored the
custom name you want to delete, then press
and hold
(LIST)
.
2
Press and hold
(DSPL)
.
The stored name will flash.
3
Rotate the volume control dial repeatedly to
select the name you want to delete.
4
Press and hold the select button.
The name is deleted. Repeat steps 3 and 4 to
delete other names.
5
Press and hold
(LIST)
.
The unit returns to normal play/reception
mode.
With the card remote commander
In step 3, to select the name, press VOL + or –.
Adjusting setup items
— SET
1
Press and hold the select button.
The setup display appears.
2
Press the select button repeatedly
until the desired item appears.
3
Rotate the volume control dial to
select the setting (example “ON” or
“OFF”).
4
Press and hold the select button.
The setup is complete and the display returns
to normal play/reception mode.
Note
Displayed items will differ, depending on the source
and setting.
With the card remote commander
In step 3, to select the setting, press
<
or
,
.
The following items can be set (follow the page
reference for details):
“
z
” indicates the default settings.
*1
When the unit is turned off.
*2
When the audio output is set to “SUB.”
Using optional equipment
CD/MD changer
Selecting the changer
1
Press
(SOURCE)
repeatedly until “CD” or
“MD” appears.
2
Press
(MODE)
repeatedly until the desired
changer appears.
Playback starts.
CLOCK-ADJ
(Clock Adjust)
BEEP
To set “ON” (
z
) or “OFF.”
AUX-A
*
1
To turn the AUX source display
“ON” (
z
) or “OFF” (page 12).
SUB/REAR
*
1
To switch the audio output.
– “SUB” (
z
): to output to a
subwoofer.
– “REAR”: to output to a power
amplifier.
DIM
(Dimmer) To change the brightness of the
display.
– “AT” (
z
): to dim the display
automatically when you turn
the lights on.
– “ON”: to dim the display.
– “OFF”: to deactivate the
dimmer.
DEMO
*
1
(Demonstration)
To set “ON” (
z
) or “OFF.”
M.DSPL
(Motion
Display)
To select the Motion Display
mode.
– “SA” (
z
): to show moving
patterns and spectrum
analyzer.
– “ON”: to show moving
patterns.
– “OFF”: to deactivate the
Motion Display.
CONTRAST
To adjust the contrast of the
display.
The contrast level is adjustable
in 7 steps.
A.SCRL
(Auto Scroll)
To scroll long displayed items
automatically when the group/
track is changed.
– “ON”: to scroll.
– “OFF” (
z
): to not scroll.
LPF
*
2
(Low
Pass Filter)
To select the cut-off frequency
“78HZ,” “125HZ” or “OFF”
(
z
).
Disc number
Unit number
