13
Viewing the Disc Memo
As a display item, the Disc Memo always takes
priority over any original CD TEXT information.
Tip
Other items can be displayed (page 11).
Erasing the Disc Memo
1
Press
(SOURCE)
repeatedly to select
“CD.”
2
Press
(MODE)
repeatedly to select the
CD unit storing the Disc Memo.
3
Press
(LIST/CAT)
for 2 seconds.
4
Press
(DSPL)
for 2 seconds.
The stored names will appear.
5
Rotate the volume control dial to
select the disc name you want to
erase.
6
Press the select button for 2 seconds.
The name is erased.
Repeat steps 5 and 6 if you want to erase
other names.
7
Press
(LIST/CAT)
for 2 seconds.
The unit returns to normal play mode.
Notes
• When the Disc Memo for a CD TEXT disc is erased,
the original CD TEXT information is displayed.
• If you cannot find the Disc Memo you want to erase,
try selecting a different CD unit in step 2.
Locating a disc by name
— List-up (For a CD unit with the CD TEXT/
CUSTOM FILE function, or an MD unit)
You can use this function for discs that have been
assigned custom names*
1
or for CD TEXT
discs*
2
.
*1
Locating a disc by its custom name: when you
assign a name for a CD (page 12) or an MD.
*2
Locating discs by the CD TEXT information: when
you play a CD TEXT disc on a CD unit with the CD
TEXT function.
1
During playback, press
(LIST/CAT)
.
The name assigned to the current disc appears
in the display.
2
Press
(LIST/CAT)
repeatedly until you
find the desired disc.
3
Press
(SEEK)
(+) or
(SEEK)
(–) to play
the disc.
Notes
• Once a disc name has been displayed for 5
seconds, the display goes back to its normal
playback mode.
• If there are no discs in the magazine, “NO DISC”
appears in the display.
• If a disc has not been assigned a custom file, “NO
NAME” appears in the display.
• The information appears only in upper case. There
are also some letters which cannot be displayed.
To
Press
View
(DSPL)
during CD/CD
TEXT disc playback
