24
GB
Common connection
When the positions of the red and
yellow leads are inverted
When the car without ACC position
After matching the connections and
switching power supply leads correctly,
connect the unit to the car’s power supply. If
you have any questions and problems
connecting your unit that are not covered in
this manual, consult the car dealer.
1
To enable the wired remote control,
set [STR CONTROL] in [SET STEERING]
to [PRESET] (page 12).
Installation
Before installing the unit, remove the
protection collar
and the bracket
from
the unit.
1
Pinch both edges of the protection
collar
, then pull it out.
2
Insert both release keys
until they
click, and pull down the bracket
,
then pull up the unit to separate.
12
continuous power
supply
Yellow
15 switched power supply Red
12 switched power supply Yellow
15
continuous power
supply
Red
Using the wired remote control
Red
Red
Yellow
Yellow
Red
Red
Yellow
Yellow
Red
Red
Yellow
Yellow
Removing the protection collar
and the bracket
Face the hook inwards.
