4
Welcome !
Thank you for purchasing this Sony Compact
Disc Player. You can enjoy your drive with the
following functions.
•
CD playback
You can play CD-DA (also containing CD
TEXT) and CD-R/CD-RW (MP3/WMA files
(page 13)).
•
Radio reception
– You can store up to 6 stations per band (FM1,
FM2, FM3, AM1 and AM2).
–
BTM
(Best Tuning Memory): the unit selects
strong signal stations and stores them.
•
Sound adjustment
–
EQ3 stage2
: You can choose any one of 7
preset equalizer curves.
•
iPod operation
iPod connection can be made by the dock
connector cable on the rear of the unit.
•
Auxiliary equipment connection
An AUX input jack on the front of the unit
allows connection of a portable audio device.
Getting Started
Resetting the unit
Before operating the unit for the first time, or
after replacing the car battery or changing the
connections, you must reset the unit.
Detach the front panel and press the RESET
button with a pointed object, such as a ball-point
pen.
Note
Pressing the RESET button will erase the clock setting
and some stored contents.
Preparing the card remote
commander
Before using the card remote commander for the
first time, remove the insulation film.
Tip
For how to replace the battery, see “Replacing the
lithium battery of the card remote commander” on
page 14.
Setting the clock
The clock uses a 12-hour digital indication.
1
Press and hold the select button.
The setup display appears.
2
Press the select button repeatedly
until “CLOCK-ADJ” appears.
3
Press
(SEEK)
+.
The hour indication flashes.
4
Rotate the volume control dial to set
the hour and minute.
To move the digital indication, press
(SEEK)
–/+.
5
Press the select button.
The setup is complete and the clock starts.
To display the clock, press
(DSPL)
. Press
(DSPL)
again to return to the previous display.
Type of discs
Label on the disc
CD-DA
MP3
WMA
RESET
button
Summary of Contents for CDX-GT42IPW - Fm/am Compact Disc Player
Page 35: ......
