11
CD/MD changer
Selecting the changer
1
Press
(SOURCE)
repeatedly until “CD” or
“MD” appears.
2
Press
(MODE)
repeatedly until the desired
changer appears.
Playback starts.
Skipping albums and discs
1
During playback, press
(ALBM)
+/–.
Repeat and shuffle play
1
During playback, press
(3)
(REP) or
(4)
(SHUF) repeatedly until the desired setting
appears.
*
When one or more CD changers, or two or more MD
changers are connected.
To return to normal play mode, select “
OFF”
or “SHUF OFF.”
Tip
“SHUF ALL” will not shuffle tracks between CD units
and MD changers.
Rotary commander RM-X4S
Attaching the label
Attach the indication label depending on how
you mount the rotary commander.
Location of controls
The corresponding buttons on the rotary
commander control the same functions as those
on this unit.
The following controls on the rotary commander
require a different operation from the unit.
•
ATT (attenuate) button
To attenuate the sound. To cancel, press again.
•
DSPL (display) button
To change display items.
•
PRESET/DISC control
The same as
(ALBM)
+/– on the unit (push in
and rotate).
•
VOL (volume) control
The same as the volume control dial on the unit
(rotate).
•
SEEK/AMS control
The same as
(SEEK)
–/+ on the unit (rotate, or
rotate and hold).
Changing the operative direction
The operative direction of the controls is factory-
set as shown below.
If you need to mount the rotary commander on
the right hand side of the steering column, you
can reverse the operative direction.
To skip
Press
(ALBM)
album
and release (hold for a
moment).
album
continuously
within 2 seconds of first
releasing.
discs
repeatedly.
discs
continuously
then, press again within 2
seconds and hold.
Select
To play
DISC
disc repeatedly.
SHUF
CHANGER
tracks in the changer in random
order.
SHUF ALL
*
tracks in all units in random
order.
Disc number
Unit number
continue to next page
t
SEL
DSPL
MODE
SEL
DSPL
MODE
OFF
ATT
SEL
SOURCE
DSPL
MODE
OFF
VOL
SEEK/AMS
PRESET/
DISC
To increase
To decrease
