20
Searching a track by listening
to track passages — ZAPPIN™
While playing back short track passages in a CD
or USB device in sequence, you can search for a
track you want to listen to.
ZAPPIN mode is suitable for searching for a
track in shuffle or shuffle repeat mode.
1
Press
(ZAP)
during playback.
After “ZAPPIN” appears in the display,
playback starts from a passage of the next
track.
The passage is played for the set time, then a
click sounds and the next passage starts.
2
Press the select button or
(ZAP)
when
a track you want to listen is played
back.
The track that you select returns to normal
play mode from the beginning.
To search a track by ZAPPIN mode again,
repeat steps 1 and 2.
In the case of “SensMe™
channels” playback
If the track being searched is transfered by
“Content Transfer,” the most melodic or
rhythmical sections* of tracks are played. For
details on the SensMe™ function, see page 14.
*
May not be detected correctly.
Tips
•
You can select the playback time from about 6
seconds/15 seconds/30 seconds (page 25). You
cannot select the passage of the track to playback.
•
Press
(SEEK)
+/– in ZAPPIN mode to skip a track.
•
Press
(1)
/
(2)
(ALBUM –/+) in ZAPPIN mode to skip
album.
•
Pressing
(BACK) also confirms a track to
playback.
Enjoying the illumination color
variation
Changing the color of display
and buttons
—Dynamic Color Illuminator
Dynamic Color Illuminator allows you to change
the color of the display and buttons on the main
unit to match the car's interior.
You can select from 12 preset colors, customized
color and 5 preset patterns.
x
Preset colors
“RED,” “AMBER,” “M_AMBER,” “YELLOW,”
“WHITE,” “LIGHT GREEN,” “GREEN,”
“LIGHT BLUE,” “SKY BLUE,” “BLUE,”
“PURPLE,” “PINK.”
x
Preset patterns
“RAINBOW,” “OCEAN,” “SUNSET,”
“FOREST,” “RANDOM.”
1
Press
(COLOR)
.
2
Rotate the control dial to select the
desired preset color, then press it.
The display returns to normal reception/play
mode.
Note
If the control dial is rotated rapidly, the color of the
display and the buttons may change too quickly.
Tip
You can enter the preset color mode from the setup
menu.
The part of each track to
playback in ZAPPIN mode.
Track
(ZAP)
pressed.
