22
Displaying clear color
— White Menu
You can display the menu more clearly (White)
without concern for color setting.
1
Press and hold the select button.
The setup display appears.
2
Rotate the control dial until “WHITE
MENU” appears, then press it.
3
Rotate the control dial to select
“WHITE-ON,” then press it.
4
Press
(BACK).
The setting is complete and the display
returns to normal reception/play mode.
To cancel White Menu, select “OFF” on step 3.
Start up effect
— Start White
When you push
(SOURCE/OFF)
on, the color of
display and the buttons on the main unit turns
white once, and then the color changes to the
customized color. You can enjoy the effect
whenever the source is turned on.
1
Press and hold the select button.
The setup display appears.
2
Rotate the control dial until “START
WHITE” appears, then press it.
3
Rotate the control dial to select
“WHITE-ON,” then press it.
4
Press
(BACK).
The setting is complete and the display
returns to normal reception/play mode.
To cancel Start White, select “OFF” on step 3.
Sound Settings and Setup Menu
Changing the sound settings
Adjusting the sound
characteristics
1
During reception/playback, press the
select button.
2
Rotate the control dial until the
desired menu item appears, then
press it.
3
Rotate the control dial to select the
setting, then press it.
4
Press
(BACK).
The setting is complete and the display
returns to normal reception/play mode.
The following items can be set (follow the page
reference for details):
EQ7 PRESET
EQ7 SETTING
POSITION
POSITION
(Listening Position setting)
ADJUST POS
*
1
(Listening Position
adjustment) (page 24)
SW POSITION
*
1
(Subwoofer Position)
BALANCE
Adjusts the sound balance: “RIGHT-15” –
“CENTER” – “LEFT-15.”
FADER
Adjusts the relative level: “FRONT-15” –
“CENTER” – “REAR-15.”
DM+
REARBAS ENH
(Rear Bass Enhancer)
SUBW LEVEL
(Subwoofer Level)
Adjusts the subwoofer volume level: “+10 dB”
– “0 dB” – “–10 dB.”
(“ATT” is displayed at the lowest setting.)
AUX VOLUME
*
2
(AUX Volume level)
Adjusts the volume level for each connected
auxiliary equipment: “+18 dB” – “0 dB” – “–8
dB.”
This setting negates the need to adjust the
volume level between sources.
*1
Hidden when “POSITION” is set to “OFF.”
*2
When AUX source is activated (page 26).
