Sony CFD-S35CP Operating Instructions Manual Download

Page: 27 / 36

The sound drops out.

• Reduce the volume.
• Clean the CD, or replace it if the CD is badly

damaged.

• Place the player in a location free from

vibration.

• Clean the lens with a commercially available

blower.

• The sound may drop out or noise may be

heard when using poor quality CD-Rs/CD-
RWs or if there is a problem with the
recording device or application software.

“NOT MP3” is displayed.

• You are trying to play a file that is not an

MP3 file but has extension “mp3”. (page 31)

“NOT MP3” and “LAYER 1”, or “NOT MP3”
and “LAYER 2” are displayed alternately.

• You are trying to play an MPEG1 Audio

Layer-1 or 2 file. You can only play MP3
(MPEG 1 Audio Layer-3) files on this player.
(page 31)

“no MP3” is displayed.

• There are no MP3 files on the disc.

Radio

The audio is weak or has poor quality.

• Replace all the batteries with new ones if

they are weak.

• Move the player away from the TV.
• If you are using the remote while listening to

AM or MW/LW radio, noise may be heard.

The picture of your TV becomes unstable.

• If you are listening to an FM programme near

the TV with an indoor antenna, move the
player away from the TV.

Troubleshooting

General

The power is not on.

• Connect the mains lead to the mains securely.
• Make sure the batteries are inserted correctly.
• Replace all the batteries with new ones if

they are weak.

• You cannot turn on the player with the

remote when you operate the player on
batteries.

The power is not on, and "BATT" and
“ERROR” are displayed alternately.

• Make sure the batteries are inserted correctly.
• Replace all the batteries with new ones if

they are weak.

There is no audio.

• Adjust the volume.
• Unplug the headphones when listening

through speakers.

Noise is heard.

• Someone is using a portable telephone or

other equipment that emits radio waves near
the player.

Move the portable telephone,

etc., away from the player.

CD Player

“no DISC” is displayed even when a CD is
in place.

• Insert the CD with the label surface up.
• The CD-R/CD-RW is blank.
• The CD-R/CD-RW was not finalized.

Finalize the CD-R/CD-RW with the
recording device.

• There is a problem with the quality of the

CD-R/CD-RW, recording device or
application software.

The CD does not play.

• Make sure that the CD compartment is

closed.

• Place the CD with the label surface up.
• Clean the CD.
• Take out the CD and leave the CD

compartment open for about an hour to dry
moisture condensation.

• Make sure “CD” appears in the display.
• Replace all the batteries with new ones if

they are weak.

continued

Summary of Contents for CFD-S35CP





































Search results

Summary of Contents for CFD-S35CP

Reviews:

Related manuals for CFD-S35CP

Brands by name

Popular brands

Sony CFD-S35CP, Operating Instructions Manual

Search results

Summary of Contents for CFD-S35CP

Reviews:

Related manuals for CFD-S35CP

Brands by name

Popular brands