157
Using Memor
y Stic
k media Applications
Changing the autorun settings
If you need to add new database files to the existing autorun settings, you
can change the autorun setting later.
The following is an example of adding the autorun setting for database
files that are set to autorun with the application on the Memory Stick
media.
Similarly, you can change the setting to delete specific data, or to start the
application on the Memory Stick media via the CLIE handheld.
1
Start “MS Autorun” from the Applications Launcher display.
2
Insert the Memory Stick media into the Memory Stick slot.
3
Press the Jog Dial navigator.
The list of applications stored on the Memory Stick media appears.
4
Tap in the “Select launch app” drop-down list, then tap
“Select Install DBs.”
The list of applications and data files appears.
5
To cancel a specified database file, tap the highlighted file.
To add a database file, tap on the file that is not highlighted.
6
Tap “Set.”
The setting is stored on the Memory Stick media, and the dialog box
for confirmation appears.
7
Tap “OK.”
Changing the autorun setting is completed.
