Sony CLIE PEG-SJ10 Operating Instructions Manual Download

Page: 182 / 222

182

Chapter 5

Customizing your Sony CLIÉ Handheld (Preferences)

The High Resolution Assist function enables the high resolution display of
an application that does not support the high resolution mode.

Tap HiRes from the drop-down list on the Preferences screen.

The HiRes Preferences screen is displayed.

To enable the High Resolution Assist function, select Enable
High Resolution Assist.

The confirmation dialog box is displayed.

Tap OK.

Select the application(s) that you do not want to display in
high resolution mode in the list box.

Note

In step 4, check an application when the following occurs in the high resolution mode:
• Performances are largely deteriorated (e.g. game).
• Display is divided into two, characters are distorted, or other operational

irregularities occur.

Setting the High Resolution Assist function

Summary of Contents for CLIE PEG-SJ10































































































































































































































Search results

Summary of Contents for CLIE PEG-SJ10

Reviews:

Related manuals for CLIE PEG-SJ10

Brands by name

Popular brands

Sony CLIE PEG-SJ10, Operating Instructions Manual

Search results

Summary of Contents for CLIE PEG-SJ10

Reviews:

Related manuals for CLIE PEG-SJ10

Brands by name

Popular brands