116
Exchanging and updating files/data using the HotSync
®
operation (Other HotSync
®
operations)
Performing the HotSync
®
operation via a
wireless LAN (for PEG-UX50 only)
You can perform the HotSync
®
operation via a network between your CLIÉ
handheld and the computer on the LAN of your office, depending on the
network environment of your office. For details, contact the System
Administrator of the LAN.
Preparing your computer
1
Click
(HotSync) in the Windows task tray (Notification
area) at the bottom right of the computer window, and select
[Network] from the shortcut menu.
2
Click
(HotSync) in the Windows task tray (Notification
area) at the bottom right of the computer window once again,
and select [Setup] from the shortcut menu.
The
Setup
dialog box is displayed.
3
Click [Network] tab.
4
Click the check box next to the user name for HotSync.
5
Click [OK].
6
Connect your CLIÉ handheld to the computer by a USB
cable, and perform the Hotsync operation by tapping
(HotSync).
The computer information (Primary PC name and Primary PC address (IP
address)) is transferred to your CLIÉ handheld.
When you perform the HotSync
®
operation via a network, your CLIÉ
handheld identifies the computer based on the information transferred.
To operate the HotSync
®
operations via a network, you must have network
administrator skills.
Continued on next page
• • • • • • • • • • • • • • • • • • •
