Using storage media such as “Memory Stick™” media
132
Using storage media such as “Memory Stick™” media
• If the battery power of your CLIÉ handheld is running low, an error message
is displayed and you cannot exchange files/data with “Memory Stick”
media. If this occurs, connect your CLIÉ handheld to the charger cradle or
fully charge your CLIÉ handheld.
• Use
CLIE Files
to format the “Memory Stick” media you use in your CLIÉ
handheld. If you format it using another application, further operation with
your CLIÉ handheld is not guaranteed.
• If you insert “Memory Stick” media that has been formatted by another
application, a message prompting you to reformat it is displayed. To use
“Memory Stick” media in your CLIÉ handheld, follow the instructions to
format it. Note, however, that all stored files/data will be erased.
• Make sure you stick a suitable label on the “Memory Stick” media.
Protecting the files/data on “Memory Stick” media
To prevent accidental erasure of important files/data, you can use the write
protect tab on the “Memory Stick” media.
Write enable position
Slide the tab to the left to select the write enable position. You can read and
write files/data on the “Memory Stick” media.
Write protect position (LOCK)
Slide the tab to the right to select the write protect position. You can only read
the files/data on the “Memory Stick” media. Select the write protect position
when you insert “Memory Stick” media containing any important files/data
that you do not want to accidentally delete or overwrite.
Tip
Shape or exact location of the tab may differ from the illustration.
LOCK
Back side
Write Enable
Position
Write Protect
Position
