– 17 –
SECTION 2
TEST PROCEDURES
Connect the Audio Break-Out box “audio in”
to the HP8924C “audio out”. Connect the
Audio Break-Out box “audio out” to the
HP8924C “audio in HI” as shown above.
Inserting Handset into Standard Test Jig
(Continued)
Audio Break-Out Box and RF Connections for HP8924C
Connect the RF cable of the Standard Test Jig
to the HP8924C as shown above.
Figure 2
(Continued)
Depress the spring-loaded latch and lower the Handset onto the RF
connector and lock in place.
Figure 3
Summary of Contents for CM-Bx200
Page 50: ... 28 ...
