– 8 –
28.
Talk into the microphone of the Handset. Your speech
will be echoed back to you through the earpiece,
confirming that the audio path of the Handset is
working properly.
29.
Press the “END CALL” key in the “ CDMA CALL
CONTROL” area on the front panel of the HP8924C/E
to end the call.
30.
Place a call to the HP8924C/E by entering in any
telephone number and pressing the “SEND” key on the
Handset.
31.
If the call goes through, the “Connected” indicator at
the top of the “CDMA CALL CONTROL” screen will
be highlighted.
32.
Talk into the microphone of the Handset. Your speech
will be echoed back to you through the earpiece,
confirming that the audio path of the Handset is
working properly.
33.
Select the “RF Channel” field and change the channel
Setting to another valid PCS channel. The “Hard
Handoff’ indicator at the top of the “CDMA CALL
CONTROL” screen will be highlighted as the Handset
completes a CDMA handoff.
34.
Talk into the microphone of the Handset. Your speech
will be echoed back to you through the earpiece,
confirming that the audio path is working properly and
the handoff is executed properly.
Ending the Tests
35.
Press the “END” key on the Handset to terminate
the call.
36.
Press the “POWER” key to turn the Handset off.
Summary of Contents for CM-Bx200
Page 50: ... 28 ...