7
SECTION 3
ACCESSORIES
3-1
Hands Free Kit
The Hands Free Car Kit QN-Z5HFK is designed to offer superior speech quality and Full Duplex speech transmission. In Full Duplex
operation both parties can speak simultaneously. The Car Kit has a RF connector for the use of an external antenna to offer a high quality
radio link to the base station. It is a one box design for quick and easy installation.
Specifications:
Input voltage
DC 12 V – 24 V, negative ground
Rated output voltage
5.0 V
Rated output current
500 mA
3-2
Cigar Lighter Charger
The QN-2CC Cigar Lighter Charger is only for use in vehicles equipped with a 12-24 volt negative ground electrical system. This Charger
is intended for charging purposes only and not for making/receiving phone calls in the car.
Charging Time:
Full charging can take up to ~3 hours, but occasionally the battery icon is not indicated as charged completely if the CMD-Z18 is switched
on or if the temperature is outside the 0°C – 45°C operating range.
Specifications:
Input voltage
DC 12 – 24 V, negative ground
Rated output voltage
5.0 V
Rated output current
500 mA
3-3
Travel Charger
The Travel Charger QN-2TC is a small and lightweight device. It has a full Input Voltage Range from 110 – 240 Volts.
Using a standard cable makes the connection to the mains socket.
Specifications:
Input voltage
110 to 240 V
Rated output voltage
5.0 V
Rated output current
500 mA
3-4
EasyCom (Soft Modem)
The EasyCom QN-2EC Data Cable connects the phone to a PC via a RS 232 cable. It supports SMS and Phonebook function as well as
Full Data/Fax Capability 9.6 Kbps.
This configuration is available for Windows 95/98.
3-5
PCMCIA Card
The functionality of the PC Card QN-2PCM is the same as the Data Cable QN-2EC.
3-6
Headset
The Headset QN-2 HS supports full Handsfree Operation, Auto Answering to incoming calls, as well as with microphone muting function.
3-7
Desk Top Charger (not for sale by itself)
The desktop charger QN-Z5 DTC can charge either the Standard or Extended battery with the phone attached.
The Desk Top Charger gets its power supply via the Power adapter or the Travel Charger QN-2TC.
Specifications:
Input voltage
DC 5 V
Rated output voltage
5.0 V
Rated output current
500 mA
