CD/MP3
–
Pla
y
11
GB
You can play all the tracks or a single track on a
disc repeatedly.
Press REPEAT repeatedly during playback
until “REP” or “REP1” appears.
REP: For all the tracks on a disc, or all the MP3
audio tracks in an album up to five times.
REP1: For a single track only.
To cancel Repeat Play
Press REPEAT repeatedly until both “REP” and
“REP1” disappear.
Notes
• You cannot select “REP” and “ALL DISCS SHUF”
at the same time.
• When you select “REP1”, that track is repeated
endlessly until “REP1” is canceled.
You can make a program of up to 25 steps from
all the discs in the order you want to play them.
You can synchro record the programmed tracks
onto a cassette tape (page 17).
1
Press CD (or FUNCTION repeatedly) to
switch the function to CD.
2
Press PLAY MODE in stop mode
repeatedly until “PGM” appears.
3
Press DISC SKIP (or DISC 1 – 5 on the
unit) to select a disc.
To program all the tracks on a disc at once,
proceed to step 5 with “AL” displayed.
4
Press
.
or
>
repeatedly until the
desired track number appears.
When programming the MP3 audio tracks,
press ALBUM – or + to select album, then
press
.
or
>
repeatedly until the
desired track number appears.
5
Press ENTER.
The track is programmed.
The program step number appears,
followed by the total playing time.
6
Program additional discs or tracks.
7
Press
N
(or
nN
on the unit).
Program Play starts.
Playing repeatedly
— Repeat Play
Creating your own
program
— Program Play
To program
Repeat steps
Other discs
3 and 5
Other tracks on the
same disc
4 and 5
Other tracks on
other discs
3 to 5
DISC
PGM
1
2
3
4
5
A
B
Selected track
number
Total playing time
(including selected track)
Disc tray number
continued
