18
GB
Waking up to music
— Play Timer
By setting the Play Timer, you can make the
system automatically turn on and off at
specified day and times. To use this function,
make sure that you have set the system clock
correctly (see “Setting the clock” on page 8).
1
Prepare the sound source you want to
play.
• CD: Load a CD. To start from a specific
track, make a program (see “Programing
CD tracks” on page 10).
• Radio: Tune in the preset radio station that
you want (see “Listening to the radio” on
page 15).
2
Press or – (or VOL + or – on
the remote) repeatedly to adjust the
volume.
3
Press CLOCK/TIMER SET on the
remote.
“PLAY SET?” flashes, then press ENTER/
YES on the remote.
4
Press
.
or
>
on the remote
repeatedly until the type of timer you
want appears, then press ENTER/YES
on the remote.
To play
Select
5
Set the time to start playing.
If you selected “PLAY ONCE?” or “PLAY
WEEKLY?” in step 4, press
.
or
>
on the remote to set the day, then press
ENTER/YES on the remote.
The hour indication flashes.
Press
.
or
>
on the remote repeatedly
to set the hour, then press ENTER/YES on
the remote.
The minute indication flashes.
Press
.
or
>
on the remote repeatedly
to set the minute, then press ENTER/YES
on the remote.
The following indication flashes again if
you selected in step 4:
“PLAY ONCE?” or “PLAY WEEKLY?”:
The day indication
“PLAY DAILY?”: The hour indication.
6
Set the time to stop playing following
the procedure in step 5.
7
Press
.
or
>
on the remote
repeatedly until the desired sound
source appears.
The indication changes as follows:
TUNER
y
CD PLAY
8
Press ENTER/YES on the remote.
The type of timer, the start time, the stop
time, the sound source, and the volume
appear in turn, then the original display
returns.
9
Press
@/1
to turn off the system.
Only once
PLAY ONCE?
Everyday
PLAY DAILY?
The same day(s)
every week
PLAY WEEKLY?
