15
GB
CMT-M70 4-239-398-
11
(1) GB
Tape
6
Set the starting time.
Press
.
/
>
on the remote repeatedly to
set the hour, then press ENTER on the
remote.
The minute indication begins flashing next.
Press
.
/
>
on the remote repeatedly to
set the minute, then press ENTER on the
remote.
“OFF TIME” appears, then the hour
indication flashes again.
7
Set the stopping time by repeating step
6.
The start time, the stopping time,
“TUNER”, and the preset station appear in
turn, then the original display returns.
8
Press
@
/
1
to turn off the system.
When the recording starts, the volume level
is automatically set to the minimum.
To
Check the settings
Turn off the timer
Tip
Once you set the timer, the time settings will remain
in the system’s memory until you change them, even
when you turn the system or the timer off. The
settings that were last used will be in effect when you
turn the timer on again.
Notes
• The system will turn on 15 seconds before the
specified starting time.
• If the system is turned on at the specified starting
time, recording will not occur.
• When you have set the Sleep Timer, the timer
recording will not operate until the Sleep Timer
Function is turned off.
• You cannot operate the Daily Timer and the timer
recording at the same time.
Do this
Press TIMER SELECT on the
remote repeatedly until
“
c
REC” appears in the
display. The preset items
appear in turn.
Press TIMER SELECT on the
remote repeatedly until
“
c
REC” disappears from the
display.
Adjusting the sound
Generating a more dynamic sound
(Dynamic Sound Generator)
Press DSG.
Each time you press the button, the display
changes cyclically as follows:
DSG 2
t
DSG OFF
t
DSG 1
Sound Adjustment
Sound Adjustment
