background image

8

GB

CMT-M70    4-239-398-

11

(1) GB

Loading the CD

1

Press 

Z

 

CD.

The disc tray slides out.

2

Load a CD onto the disc tray.

3

Press 

Z

 

CD again to close the disc tray.

Playing the CD

–– Normal Play/Shuffle Play/Repeat

Play

This system lets you play CDs in different play
modes.

1

Press FUNCTION repeatedly until “CD”
appears in the display.

Load with the
label side up.
When you play
a CD single
(8 cm CD),
load it onto the
inner circle of
the tray.

Track number

Playing time

2

Press PLAY MODE/TUNING MODE (or
TUNING MODE/PLAY MODE on the
remote) repeatedly until the mode you
want appears in the display.

Select

No display

SHUFFLE

PGM

3

Press CD

 

N

.

Other Operations

To

Stop playback

Pause

Select a track

Find a point
in a track

Remove the CD

Play repeatedly
(Repeat Play)

To play

The CD in original order.

The tracks on the CD in random
order.

The tracks on the CD in any
order that you want (see
“Programming the CD tracks” on
page 9).

Do this

Press 

x

.

Press CD 

X

 (or 

X

 on the

remote).  Press again to resume
playback.

During playback or pause, press

l/L

 (or 

./>

 on the

remote) repeatedly until you find
the desired track.

During playback, press and hold
down 

m

/

M

 until you find the

desired point.

Press 

Z

 CD.

Press REPEAT/FM MODE (or
CD REPEAT on the remote)
repeatedly during playback until
“REPEAT” or “REPEAT 1”
appears in the display.

REPEAT: For all the tracks on
the CD.

REPEAT 1: For only the
currently playing track.

To cancel playing repeatedly,
press REPEAT/FM MODE (or
CD REPEAT on the remote)
repeatedly until “REPEAT” and
“REPEAT 1” disappear from the
display.

CD

  1  005

Summary of Contents for CMT-M70 Primary

























Reviews: