47
GB
Op
er
ati
o
n
s
Listening to audio material from an
external component
You can listen to the playback audio from an
external component (such as a portable music
player, etc.) connected to the AUDIO IN jack on
the unit.
Use an audio connecting cable (not supplied) to
connect the AUDIO IN jack on the unit and the
audio output jack on the external component.
Make sure the audio connecting cable (not
supplied) is firmly inserted into both jacks. If not,
noise may be generated in the audio output.
1
Press VOLUME – to turn down the
volume on this system.
2
Connect an external component
and the unit using an audio
connecting cable (not supplied).
3
Press AUDIO IN to select the
AUDIO IN function.
4
Start playback of the connected
component, and adjust its volume.
Playback audio is output from the speakers of
this system. For details on the operation of
the connected component, refer to the
operating manual supplied with the
connected component.
Notes
•
Lower the volume on this system using VOLUME –
before disconnecting the external component.
•
The system may enter standby mode automatically if
the volume level of the connected component is too
low. Adjust the component’s volume accordingly. See
“Turning off the automatic standby function” (page 21).
AUDIO IN jack
Summary of Contents for CMT-MX700Ni
Page 77: ...77GB Precautions Specifications ...
Page 78: ...78GB ...
Page 79: ...79GB Precautions Specifications ...
Page 80: ... 2010 Sony Corporation Printed in China 4 199 695 12 1 ...