31
GB
Op
er
ati
o
n
s
To reduce static noise on a weak FM stereo
station
Press FM MODE repeatedly until “MONO” lights
up to turn off stereo reception.
Tip
For better broadcast reception, try changing the direction
or location of the antenna. For example, position the
antenna near or outside a window. If the reception does
not improve, try connecting an external antenna (not
supplied). Keep the antenna away from the power cord to
avoid picking up noise.
Notes
•
When tuning in a DAB/DAB+ station, it may take a few
seconds before you hear any sound.
•
When tuning in a DAB/DAB+ station, primary service
is automatically received when secondary service ends.
Other operations
To improve tuner reception
Turn off the CD player power by using the
system’s power management function. By default,
the CD player power is turned on. Use the buttons
on the unit to turn off the CD player power.
1
Press FUNCTION repeatedly to
select the CD function.
2
Press
?
/
1
to turn off the system.
3
Wait until “STANDBY” stops
flashing.
The clock display appears. If the clock
display does not appear, press DISPLAY.
4
Press
?
/
1
while holding down
+
until “CD POWER OFF” appears.
With the CD player power turned off, access
time is increased. To turn on the CD player
power, repeat the procedure until “CD
POWER ON” appears.
Presetting radio stations
By presetting radio stations, you can easily reselect
them using the corresponding preset number. You
can preset up to 20 FM stations and 20 DAB/
DAB+ stations.
1
Tune in the desired station.
2
Press MEMORY.
The preset number currently being selected
flashes.
3
Press
M
/
m
to select the desired
preset number.
If another station is already assigned to the
selected preset number, that station is
replaced by the new station.
4
Press ENTER.
“Complete!” appears, and the station is
preset.
To select a preset radio station
Press TUNING MODE repeatedly until
“PRESET” appears, then press +/– repeatedly to
select the desired preset number.
Tip
During DAB/DAB+ reception, secondary services can
also be preset.
Note on presetting DAB/DAB+ stations
You can preset a DAB/DAB+ service only when it can be
received.
To
Do the following:
View information
such as the frequency
of the current station
Press DISPLAY repeatedly.
Select different
stations
Press
.
/
>
repeatedly
to select the desired station.
Press the corresponding
numeric button on the
remote to select the preset
number of the desired
station.
Summary of Contents for CMT-MX700Ni
Page 77: ...77GB Precautions Specifications ...
Page 78: ...78GB ...
Page 79: ...79GB Precautions Specifications ...
Page 80: ... 2010 Sony Corporation Printed in China 4 199 695 12 1 ...