28
GB
CMT-NEZ3
North-American model:
Continuous RMS power output (reference):
10 + 10 W (6 ohms at
1 kHz, 10% THD)
European model:
DIN power output (rated): 11 + 11 W (6 ohms at
1 kHz, DIN)
Continuous RMS power output (reference):
15 + 15 W (6 ohms at
1 kHz, 10% THD)
Music power output (reference):
28 + 28 W
Other models:
The following measured at AC 120, 220 or 240 V,
50/60 Hz
DIN power output (rated): 11 + 11 W (6 ohms at
1 kHz, DIN)
Continuous RMS power output (reference):
15 + 15 W (6 ohms at
1 kHz, 10% THD)
Inputs
AUDIO IN:
Sensitivity 250 mV,
impedance 47 kilohms
Outputs
PHONES:
Accepts headphones with
an impedance of 8 ohms or
more
SPEAKER:
Accepts impedance of 6 to
16 ohms.
CD player section
Laser Diode Properties
Emission duration:
continuous
Laser Output: Less than
44.6
µ
W
(This output is the value
measurement at a distance
of 200 mm from the
objective lens surface on
the Optical Pick-up Block
with 7 mm aperture)
Frequency response
20 Hz – 20 kHz
Tape deck section
Recording system
4-track 2-channel, stereo
Tuner section
FM stereo, FM/AM superheterodyne tuner
FM tuner section
Tuning range
87.5 – 108.0 MHz
Antenna
FM lead antenna
Antenna terminals
75 ohms unbalanced
Intermediate frequency
10.7 MHz
AM tuner section
Tuning range
Pan-American model:
530 – 1,710 kHz
(with the tuning interval
set at 10 kHz)
531 – 1,710 kHz
(with the tuning interval
set at 9 kHz)
European model:
531 – 1,602 kHz
(with the tuning interval
set at 9 kHz)
Other models:
530 – 1,710 kHz
(with the tuning interval
set at 10 kHz)
531 – 1,602 kHz
(with the tuning interval
set at 9 kHz)
Antenna
AM loop antenna, external
antenna terminal
Intermediate frequency
450 kHz
Speaker
CMT-NEZ5
Speaker system
2-way, bass-reflex type
Speaker units
Woofer:
10 cm dia., cone type
Tweeter:
4 cm dia., cone type
Nominal impedance
6 ohms
Dimensions (w/h/d)
Approx. 145 × 235 ×
175 mm
Mass
Approx. 1.9 kg net per
speaker
CMT-NEZ3
Speaker system
Full Range Speaker
System
Speaker units
Woofer:
North American model:
8 cm dia., cone type
Other models:
10 cm dia., cone type
Nominal impedance
6 ohms
Dimensions (w/h/d)
Approx. 145 × 235 ×
155 mm
Mass
North American model:
Approx. 1.4 kg net per
speaker
Other models:
Approx. 1.5 kg net per
speaker
